Supply single shaft type x500st (standard)

Single shaft type x500st (standard) - (door) fitted

Deep hole processing machine gun drill is introduced, also called processing, gun drill is a drill on a workpiece in the hole was deep and the technology. The definition of general deep hole hole is long: size greater than 10:1 hole, and especially the hole length to diameter ratio is greater than the part, process must match the special machinery and tools to greatly improve machining efficiency and precision. Into blessings of fine machine with nearly 30 years machinery research and development manufacturing experience, the production of the deep hole processing machine, after processing dimensional accuracy, geometric accuracy and surface roughness are very good and stable, marketing world more than 20 countries by the customer consistent high praise.

The characteristics of

Suitable for auto parts, all kinds of material of tube, all kinds of material bar and axis of small deep hole processing

Into the ball screw, match to adopt servo motor to set easy, high precision

Material rapidly up and down

Can design 1 ~ 4 axis processing at the same time

SYNTEC CNC control system (can be in accordance with customer demand matching specified label)

Automatic lubrication system, oil shortage will send alarm and shutdown, increase the service life of the machine and precision

Special processing of the pore size can be customized

specifications

Model no., CYS - 500 CYD - 500, CYT - 500, CYS CYF - 500-1000, CYD - 1000, CYT - 1000, CYS CYF - 1000-1500, CYD - 1500, CYT - 1500, CYF - 1500 borehole diameter drilling maximum depth of spindle's highest number of spindle speed CNC control system, frequency conversion motor spindle feed drilling (Z) center out of the water pump pu spindle feed rate fast feed pump output maximum pressure tank capacity of the machine of cutting area

From 3 to 12, 10 - phi phi phi is 3 ~ 25 mm phi 12, 10 - phi phi phi is 3 ~ 25 mm phi 12, from 10 to 25 mm

500 mm to 1000 mm to 1500 mm

1 ~ 4 axis 1 ~ 4 axis 1 ~ 4 axis

6000 RPM to 6000 RPM to 6000 RPM

SYNTEC/FANUC, MITSUBISHI SYNTEC/FANUC, MITSUBISHI SYNTEC/FANUC, MITSUBISHI

3 ~ 7.5 HP (with invertor) 3 ~ 7.5 HP (with invertor) 3 ~ 7.5 HP (with invertor) 2 groups

AC servo 1.5 kw to 3.5 kw AC servo 1.5 kw to 3.5 kw AC servo 3.5 kw to 3.5 kw

3 ~ 7.5 HP 3 ~ 7.5 HP 3 ~ 7.5 HP 2 groups

10 to 10 to 150 mm / 150 mm/min min 10 ~ 150 mm/min

5000 mm/min to 5000 mm/min to 5000 mm/min

30 ~ 80 L/min 30 ~ 80 L/min 30 ~ 80 L/min

140 KGS/cm2 140 KGS/cm2 140 KGS/cm2

600 ~ 600 ~ 600 L, 900 L, 800 ~ 1200 L

About 2500 ~ 2500 KG of about 3000 ~ 4000 KG of about 3500 ~ 4500 KG

About 3000 x 3000 x 4100 mm / 3000/3300 3000/3300/4100 mm 3400 x 4100 mm / 3300/3400

Does the specification is for reference only, the company reserves the right to change specifications at any time